Trailer Wiring Harness Installation – 2018 Dodge Durango – Kansas Kansas 2018

Category: DODGE Durango 14 0

Trailer Wiring Harness Installation – 2018 Dodge Durango – Omaha Nebraska 2018

Dodge Durango Custom Parts

Click for more info and reviews of this Curt Custom Fit Vehicle Wiring:

Check out some similar Custom Fit Vehicle Wiring options:

Search for other popular Dodge Durango parts and accessories:

Don’t forget to subscribe!

Full transcript:
Speaker 1: Today on this 2018 Dodge Durango we’ll be having a look at and showing how to install the CURT T-Connector Vehicle Wiring Harness for factory tow package vehicles with a four-pole flat trailer connector, part number C55384. Here’s what our wiring looks like installed. This four-pole flat connector here gives you the basic lighting functions that are required by law in order for you to safely and legally tow a trailer. This green wire will provide your right turn signal and right brake light. The yellow wire will give you your left signal and left brake light. Brown wire will give you your taillights and running lights and the white wire provides the necessary ground connection between your trailer and your Durango.What’s really great about this wiring harness is that this will utilize your vehicle’s factory tow package connector with no cutting or splicing required.

It will simply plug right into the connector and you’re good to go. Now what our customers like about this wiring harness compared to other options out there is that it’s giving them exactly what they need in order to tow a basic trailer without spending a lot of money for a wiring harness. Additionally, it also gives you the opportunity to plug in a seven-way connector in the future if you ever wanted to, but yet still maintain having your four-pole flat.Now that we’ve gone over some features of the wiring harness, we’ll show you how to get it installed. To begin our install we need to location our factory tow package connector. It will be behind our fascia in this general area right here.

On the backside of our fascia this is our connector right here. It has a protective dust cover on it right now. We need to remove this. We’ll remove the plug by pressing on this black tab here and pulling the plug out. We’ll take some dielectric grease now.

We have this on our website. We’ll put this inside the connector. This will just help better protect it from any moisture that may get inside. We’ll now take the male end of our connector and we’ll slide it inside the factory tow package. We’ll push it in place until it locks.

This other end here, we’ll reinstall the factory dust cover plug that we removed. This will help protect this end in case we need to use it for something else in the future.We went ahead and bundled up our excess wire to a factory wiring harness using a zip tie. We secured our four-pole flat connector around a safety chain loop on our hitch using the dust cover. Once you have it installed, you will need to make a trip to your local dealership in order to have the computer reflashed so the factory tow package is enabled properly. They’ll be able to do that for you for a minimal fee. That completes our look at and installation of the CURT T-Connector Vehicle Wiring Harness for factory tow package vehicles with a four-pole flat trailer connector, part number C55384, on our 2018 Dodge Durango.

As the group at Electric motor Pattern uncovered when it included one to its long-lasting fleet, the Dodge Durango GT is a spacious, versatile SUV that’s additionally sportier compared to you may expect. That claimed, with a 295-hp V-6 under the hood, it’s no place near as effective as the Durango SRT 392 But with the new Rallye Appearance Package, you can a minimum of provide the Durango GT an SRT-inspired look.

Reported today, the Rallye Appearance Package uses an extra hostile front end, a sportier hood, and also LED foglamps. It may not be essential, but Dodge says the hood inside story and also vents are really useful. If you tow a great deal, it probably can not injure.

For contrast, the front end of a Dodge Durango SRT 392.
” A number of our clients like the efficiency look of the Durango R/T and also Durango SRT, but enjoy with the acclaimed Pentastar V-6 engine’s 295 horsepower and also the exceptional fuel efficiency it provides,” claimed Steve Beahm, FCA’s North American head of passenger cars, in a release. “This new Durango GT Rallye Appearance Package gives those three-row SUV purchasers the most effective of both worlds.”

The Rallye plan is available to get now for $1,495 and also can be found in seven different shades. Taking Into Consideration the Durango GT begins at $38,990 including location, that brings the base cost of a Rallye-equipped Durango to $40,485.

Dodge Durango Custom Parts

Trailer Wiring Harness Installation – 2018 Dodge Durango –, Dodge Durango Custom Parts Aurora Colorado.

New Dodge Durango Custom Parts in Aurora Colorado, Latest Relevant info More About Dodge Durango Suv Amber Alert and Dodge Durango Custom Parts, Please Keep Visiting Facebook Groups.

Related Articles

Leave a Reply

%d bloggers like this: